Available colours

This revolutionary WPC decking board is available in 5 photorealistic wood designs. The wood appearance brings natural beauty and warmth to any outdoor space.

Silver Teak

Reclaimed Oak

Amber Oak

Sienna Oak

Midnight Oak

DFDF162

Hollow board

The DFDF162 is a hollow woodcomposite board covered with a foil featuring a photorealistic woodgrain.

The boards are produced approximately 4 cm longer so that the ends can be cut off if desired, in order to achieve a clean and smooth finish.

Photorealistic wood print

Substructure

The components required for installing a deck depend on the type of surface it will be built on and the type of beam selected. There are two main installation types: on a solid surface or as a floating structure, such as on a rooftop terrace. Below is an overview of the different types of beams and the corresponding components needed for each installation method.

Solid Surface

A solid surface refers to a stable and permanent base onto which the deck structure can be directly mounted. Examples include a concrete slab or paved patio. In this setup, the beams are securely anchored to the solid surface using appropriate fasteners such as plugs and screws. This creates a strong and reliable foundation for the decking boards.

The components listed below are suitable for the installation of a terrace using PVC support beams.

Article	Colour	Material
PVC Beam (DFB048)	Black	PVC
Standard Clip (DFC001)	N/A	Stainless Steel
Starter and finishing clip (DFC004)	N/A	Stainless Steel

The components listed below are suitable for the installation of a terrace using aluminium support beams.

Article	Colour	Material
Aluminium beam (DFBA040)	N/A	Aluminium
Rubber protection tile (DFR90x90)	N/A	Rubber
Synthetic clip (DFC005)	N/A	Stainless Steel + PVC
Starter and finishingclip (DFC006)	N/A	Stainless Steel

The components listed below are suitable for the installation of a terrace using wood support beams.

Article	Colour	Material	Dimensions
Fixating Clip (DFC002)	N/A	Stainless Steel
Starter and finishing clip (DFC004)	N/A	Stainless Steel

Floating structure

A floating structure is used when there is a solid surface with a height difference that cannot be corrected using the beams alone, or when the surface cannot be altered by anchoring the beams directly onto it. In this case, a sturdy frame of aluminum beams is constructed and placed on adjustable pedestals.

For higher placements or placement on roof terraces you can use polypropylene pedestals that allow heights of more than 200 mm. When using these pedestals, however, you cannot use wood composite beams, since it is not a structural element.

Article	Colour	Material	Dimensions
DFP35/50-70	Black	Polypropylene	Height: 35-70
DFP50/80-70	Black	Polypropylene	Height: 50-80
DFP80/110-70	Black	Polypropylene	Height: 80-110
DFP110/140-70	Black	Polypropylene	Height: 110-140
DFP140/170-70	Black	Polypropylene	Height: 140-170
DFP30	Black	Polypropylene	Height:30

The components listed below are suitable for the installation of a terrace using Aluminium support beams.

Article	Colour	Material
Aluminium Beam (DFBA040)	N/A	PVC
Synthetic Clip (DFC005)	N/A	Stainless Steel + PVC
Starter and finishing clip (DFC004)	N/A	Stainless Steel
Joiner piece (DFJP)	N/A	Aluminium
Multifunctional corner (DFMC)	N/A	Aluminium

The components listed below are suitable for the installation of a terrace using wood support beams.

Article	Colour	Material	Dimensions
Fixating Clip (DFC002)	N/A	Stainless Steel
Starter and finishing clip (DFC004)	N/A	Stainless Steel

To finish the terrace, a finishing skirting board can be used.

This skirting board is available in aluminum covered with a foil. It can be used in combination with a terrace installation on wood, PVC, or aluminum support beams.

Installing a finishing skirting board not only enhances the overall appearance of the terrace by covering the edges, but also helps protect the structure and maintain a clean, professional look.

Article	Colour	Material	Dimensions
L-profile (DFLAF076)	Silver Teak (ST) Reclaimed Oak (RO) Amber Oak (AO) Sienna Oak (SO) Midnight Oak (MO)	Aluminium + foil

Why Duofuse?

1/3

Natural wood look with superior durability

Offers the aesthetic appeal of wood while being significantly stronger and longer-lasting.

2/3

Lasting beauty with low maintenance

Duofuse requires hardly any maintenance – no painting, no hassle, always a clean look.

3/3

Easy to install with a stunning result

With Duofuse, installation is quick and easy — no special tools, no hassle. The result? A sleek, durable finish that instantly upgrades any space. Inviting outdoor living has never been this effortless.